Application and Debugging of River Pebble Sand Making Machine

Application of river pebble sand making machine

The typical use of the river pebble sand making machine is to adapt to the current artificial sand making industry. The river pebble sand making machine has: small discharge particle size, uniform particle shape, large production capacity, long life of hammer head, small supporting power, change from tertiary crushing to secondary crushing, simplified process, simple structure, convenient maintenance, stable operation, etc. Features.

The investment of river pebble sand making machine is 35%-50% lower than that of traditional process equipment of the same scale, and the output efficiency is 35%-50% higher than that of traditional process equipment of the same scale. The long-term operation and maintenance cost is 35%-50% lower than the traditional process equipment of the same scale.

Advantages of river pebble sand making machine

  • 1. The river pebble sand making machine adopts a diamond-shaped impact block to avoid damage to the vertical plate after the material is impacted and worn.
  • 2. The smoother curved design of the launch port and the interior reduces the flow resistance of the material and greatly improves the material passing capacity.
  • 3. The dual-purpose bulk material tray of the river pebble sand making machine is easy to operate, and realizes the convenient conversion of two feeding methods.
  • 4. The special sealing structure at the lower end of the main shaft of the pebble sand making machine ensures that there is no oil seal and no oil leakage.
  • 5. Using the hydraulic cover opening device imported from Japan, the upper cover can be moved conveniently and quickly, which saves labor and effort when replacing and repairing the internal parts of the machine.
  • 6. The river pebble sand making machine adopts the motor with high protection level. This type of motor has the characteristics of high efficiency and low noise.

Debugging of River Pebble Sand Making Machine

Before the river pebble sand making machine leaves the factory, the manufacturing plant has carried out no-load operation, and all parts are normal. However, after the river pebble sand making machine is installed on site, it should be checked.

  • 1. Check whether the lubricating oil pipe is firmly connected, and refill the oil before the test run.
  • 2. Check the connection of each component, it should be firm and reliable, carefully check whether there is foreign matter on the impeller, if there is, it should be removed in time.
  • 3. Check whether the motor wiring is correct and whether the voltage is normal.
  • 4. Before installing the belt of the river pebble sand making machine, start the motor first, and the rotation direction should be consistent with the direction of the sand making machine. Rotate in the opposite direction.
  • 5. For the double-motor drive of the river pebble sand making machine, the main shaft assembly and the motors on both sides are connected to the main shaft assembly with the same number of triangular tapes, and the tensioning force of the triangular tapes on both sides should be adjusted to be the same and straight. After the inspection is correct, before handing over the production, first carry out the test run with no load and load, and then hand over the production after confirming that there is no problem in the test run.