For the use of the river pebble sand making machine, the operation plays a great role. Improper operation will not only fail to achieve good efficiency, but also cause damage to the equipment and reduce its service life. Therefore, in production, the operation cannot be ignored. On the one hand, here is to introduce some precautions in the operation of the river pebble sand making machine in six aspects.
When the river pebble sand making machine is in use, pay attention to the temperature of the bearing box, because if the temperature is high, it is easy to cause deformation and fracture of the internal parts, and this high temperature phenomenon shows that there are certain problems in the bearing box, generally In other words, the temperature of the component does not exceed 70 degrees, and the normal temperature is between 40-60 degrees. If it is not within the range of this requirement, it is necessary to stop the machine in time for inspection.
When the river pebble sand making machine is in use, it should be noted that it cannot be overloaded for a long time. If it is overloaded due to a certain demand, at this time, it must be noted that the feeding size cannot exceed the rated range required by the machine, otherwise it will cause Changes in efficiency, damage to equipment, etc.
In the early stage of production, when adding materials, the river pebble sand making machine usually has a short-term unbalanced process. At this time, do not stop the feeding. On the contrary, increase the feeding amount as much as possible until the vibration is reduced. If the production If the feeding size is large, the river pebble sand making machine will vibrate intermittently, but it will return to normal state after a few seconds. It’s a normal situation caused by being washed away, don’t panic.
During the production of the river pebble sand making machine, the wear of the internal parts is unavoidable. This kind of wear phenomenon sometimes causes the vibration of the equipment to intensify. At this time, it is generally caused by the uneven rotor and accumulation of materials after wear. The unbalanced state of the belt pulley, or due to the looseness of the tapered sleeve of the pulley, etc., after inspection, if it is found to be abnormal vibration, it needs to be stopped for inspection.
Inside the river pebble sand making machine, the rotor wear parts are designed to protect the rotor body from wear, so in production, the wear of the rotor and the inspection of the internal material lining of the equipment need to be one of the daily maintenance work. In this way, hidden dangers can be found and checked in time to ensure the normal operation of the machine.
When the pebble sand making machine is working, pay attention to check the current of its motor. If the current is too large, it means that the motor is overloaded. At this time, it is necessary to reduce the feeding amount until the current is normal.
The article mainly introduces the six major precautions for the use of the river pebble sand making machine. These different precautions are to prevent production failures and ensure the smooth operation of the equipment. In actual production, these aspects need to be paid enough attention by the staff. Of course, in production, there are still many precautions, such as the lubrication of the river pebble sand making machine, which cannot be ignored.